Vehicle safetyEU: Final version of the regulation for type approval templates of vehicle safety systems

June 19, 2024

EU: Final version of the regulation for type approval templates of vehicle safety systems

 

The European Commission has published a final version of an Implementing Regulation laying down rules for the application of Regulation (EU) 2019/2144 (General Safety Regulation II) as regards templates for the approval of the intelligent speed assistance system, the driver drowsiness and attention warning system, the event data recorder, the alcohol interlock installation facilitation and the advanced driver distraction warning system.

In accordance with Article 6(1) of Regulation (EU) 2019/2144, motor vehicles are to be fitted with intelligent speed assistance systems, driver drowsiness and attention warning systems, event data recorders, alcohol interlock installation facilitation and advanced driver distraction warning systems. In order to ensure uniform implementation of that Regulation, it is appropriate to identify the information relevant for the approval of each of those systems.

It is necessary to ensure a consistent approach, in particular as regards the specific information relevant for the approval of each of the systems to be included in the information document.

Furthermore, harmonised templates of the approval documents are needed to ensure clarity, predictability and consistency of the information to be provided and thus, reducing the administrative burden for both the manufacturers and the approval authorities.

For example, for driver drowsiness and attention warning (DDAW) system, the following set of information is required in the type approval document:

  1. GENERAL

0.1. Make (trade name of manufacturer):

0.2. Type:

0.2.1. Commercial name(s) (if available):

0.3. Means of identification of type, if marked on the vehicle / component / separate technical unit

0.3.1. Location of that marking:

0.4. Category of vehicle:

0.5. Company name and address of manufacturer:

0.8. Name(s) and address(es) of assembly plant(s):

0.9. Name and address of the manufacturer’s representative (if any):

12.11. Driver drowsiness and attention warning (DDAW) system

12.11.2. Detailed description of the DDAW system:

12.11.2.1. Methodology of the DDAW system to assess driver’s drowsiness:

12.11.3. Detailed description of the visual warning of the DDAW system:

12.11.3.1. Reference of the code of the test protocol tested by the Technical Service, for which the DDAW system shall deliver a warning when performed:

12.11.4. Detail description of the technical similarities or the adaptation required to enable the DDAW system:

12.11.5. Means to enable a periodic technical inspection with regard to the DDAW system:

To find out more about the vehicle type approval in the EU, please do not hesitate to contact the Institute for Global Automotive Regulatory Research Directly.

https://igarr.com/wp-content/uploads/2023/09/Logo2.jpeg
Kunstlaan / Avenue des Arts 56, Brussels
Plaza MallDova, 21, Arborilor str., Chisinau
Atrium Centrum, Al. Jana Pawła II 27, 00-867 Warsaw
+48 575 570 017

Follow us:

The content provided on this website is not intended to and does not constitute legal advice. Submissions or postings to the website are not confidential. We do not warrant or guarantee the accuracy, completeness or adequacy of the content. Your use of the content on the website or materials linked from this website is at your own risk.

Copyright © Institute for Global Automotive Regulatory Research 2024

en_USEnglish