Sécurité des véhiculesUE : version finale du règlement relatif aux modèles d'homologation des systèmes de sécurité des véhicules

19 juin 2024

UE : version finale du règlement relatif aux modèles d'homologation des systèmes de sécurité des véhicules

 

The European Commission has published a final version of an Implementing Regulation laying down rules for the application of Regulation (EU) 2019/2144 (General Safety Regulation II) as regards templates for the approval of the intelligent speed assistance system, the driver drowsiness and attention warning system, the event data recorder, the alcohol interlock installation facilitation and the advanced driver distraction warning system.

In accordance with Article 6(1) of Regulation (EU) 2019/2144, motor vehicles are to be fitted with intelligent speed assistance systems, driver drowsiness and attention warning systems, event data recorders, alcohol interlock installation facilitation and advanced driver distraction warning systems. In order to ensure uniform implementation of that Regulation, it is appropriate to identify the information relevant for the approval of each of those systems.

It is necessary to ensure a consistent approach, in particular as regards the specific information relevant for the approval of each of the systems to be included in the information document.

Furthermore, harmonised templates of the approval documents are needed to ensure clarity, predictability and consistency of the information to be provided and thus, reducing the administrative burden for both the manufacturers and the approval authorities.

For example, for driver drowsiness and attention warning (DDAW) system, the following set of information is required in the type approval document:

  1. GENERAL

0.1. Make (trade name of manufacturer):

0.2. Type:

0.2.1. Commercial name(s) (if available):

0.3. Means of identification of type, if marked on the vehicle / component / separate technical unit

0.3.1. Location of that marking:

0.4. Category of vehicle:

0.5. Company name and address of manufacturer:

0.8. Name(s) and address(es) of assembly plant(s):

0.9. Name and address of the manufacturer’s representative (if any):

12.11. Driver drowsiness and attention warning (DDAW) system

12.11.2. Detailed description of the DDAW system:

12.11.2.1. Methodology of the DDAW system to assess driver’s drowsiness:

12.11.3. Detailed description of the visual warning of the DDAW system:

12.11.3.1. Reference of the code of the test protocol tested by the Technical Service, for which the DDAW system shall deliver a warning when performed:

12.11.4. Detail description of the technical similarities or the adaptation required to enable the DDAW system:

12.11.5. Means to enable a periodic technical inspection with regard to the DDAW system:

To find out more about the vehicle type approval in the EU, please do not hesitate to contact the Institute for Global Automotive Regulatory Research Directly.

https://igarr.com/wp-content/uploads/2023/09/Logo2.jpeg
Avenue des Arts / Avenue des Arts 56, Bruxelles
Plaza MallDova, 21, rue Arborilor, Chisinau
Atrium Centrum, Al. Jana Pawła II 27, 00-867 Varsovie
+48 575 570 017

Suivez-nous:

Le contenu fourni sur ce site Web n’est pas destiné à constituer et ne constitue pas un conseil juridique. Les soumissions ou les publications sur le site Web ne sont pas confidentielles. Nous ne garantissons pas l'exactitude, l'exhaustivité ou l'adéquation du contenu. Votre utilisation du contenu du site Web ou des éléments liés à ce site Web est à vos propres risques.

Copyright © Institut de recherche mondiale sur la réglementation automobile 2024

fr_FRFrançais